Ring designer
Custom Ring Designer: Design First, Then Commission
A custom ring designer lets you work out exactly what you want before you pay anyone. Design the ring in 3D in Ring Studio, then commission a jeweller with a brief so clear that quotes are comparable and revisions are few.
On this page
- Step 1
- Design the ring in Ring Studio
- Step 2
- Send the same brief to 2-3 jewellers
- Step 3
- Approve a CAD render
- Step 4
- Jeweller casts, sets and finishes
Why design a custom ring before you see a jeweller
A custom ring conversation usually starts with a sketch on paper or a handful of screenshots of other people's rings. That's fine, but it leaves a lot open to interpretation, and every round of "not quite" costs time. A 3D design closes the gap: the jeweller can see the stone shape and size, how the setting is built, what's under the stone and how wide the band is.
It also makes quotes fairer. If three jewellers each quote against their own interpretation of "oval, delicate, vintage-ish", you can't compare the numbers. If they quote against the same design, you can. Our page on custom vs off-the-shelf rings covers when custom is worth it.
Designing your custom ring in Ring Studio
- Build the design by hand, from a description with the AI, or from a photo of a ring you like (photo with Pro).
- Decide the stone: shape, approximate carat, orientation and type. Choose natural or lab-grown diamond or a coloured stone such as sapphire.
- Choose setting, prong tips, halo, gallery and side stones.
- Design the band and pick the metal.
- Add personal details the jeweller should know about: engraving text, or hidden initials under the stone (Pro).
- Stack the wedding band if there will be one (Pro), so the jeweller can plan both together.
- Note the live price estimate to sanity-check your budget, remembering it's not a quote.

The brief: what to bring a custom jeweller
Copy this structure into an email and fill it in from your design.
Design: screenshots attached (top, side, end-on). Ring code: [if the jeweller uses Ring Studio].
Centre stone: oval, about 1.2 ct, north-south. Lab-grown diamond. Certificate required.
Setting: 4 claw prongs, hidden halo, tulip gallery.
Band: tapered plain band, about 2 mm at the back.
Metal: yellow gold, 18k preferred.
Personal: initials under the stone; engraving inside: date.
Size: UK M. Budget: range including the stone. Needed by: date.
The example values are illustrative; use your own. Two things the app can't fill in for you: metal karat, which you choose with the jeweller (see gold karats explained), and the exact stone, which the jeweller sources and grades.
Questions to ask before you commission
| Ask | Why it matters |
|---|---|
| Is CAD done in-house? | Speeds up revisions; you may deal with the designer directly |
| How many revisions are included? | Avoids surprise design fees |
| Will I see a render or resin model? | Your last chance to change things before casting |
| Where is the stone from, and is it certified? | See diamond certificates and ethical sourcing |
| Is the metal recycled? | Many jewellers offer recycled gold |
| What's the deposit and timeline? | Plan around a proposal or wedding date |
| Is resizing or aftercare included? | Prong checks and re-polishing add up over time |
For a full walkthrough of the commissioning relationship, see how to work with a jeweller on a custom ring. If you're commissioning remotely, buying an engagement ring online safely is worth a read.
How long a custom ring takes, and what it costs
Timelines differ between jewellers, but a typical commission runs something like this once you've chosen who will make it:
| Stage | Typical time |
|---|---|
| Brief, quote and deposit | A few days to a week |
| CAD model and revisions | One to two weeks |
| Stone sourcing (can run alongside CAD) | Days to several weeks |
| Printing, casting, setting, polishing | Two to four weeks |
| Hallmarking, where required | Often adds a few days |
So allow roughly six to ten weeks from first contact, longer for unusual stones or busy periods before Christmas and Valentine's Day. On cost, the centre stone is usually the largest share; design time, metal and setting labour make up the rest. Our guide to custom engagement ring costs breaks it down, and the hallmarks guide explains why UK rings are stamped.
One more tip: send the jeweller your ring size in their own sizing system, and if you're not sure of it, ask them to size you in person before they cast.
What Ring Studio can't do for a custom ring
It's a design tool, not a jeweller. It doesn't make or sell rings, it doesn't export STL or 3DM files, and it doesn't yet have dedicated options for tension, cathedral, split shank, cluster or trellis designs. If your ring needs one of those, design what you can and describe the rest; your jeweller's CAD can model anything.
Frequently asked questions
How much does a custom ring cost compared with a ready-made one?
It depends on the jeweller and the design. The stone usually dominates the cost; custom work adds design and CAD time, though some jewellers charge little more than for a similar stock ring. Get two or three quotes against the same brief.
Do custom jewellers charge a deposit?
Most do, commonly a portion of the price before CAD or stone sourcing begins, with the balance on collection. Ask whether the deposit is refundable if you don't approve the design.
Can a jeweller make a ring from a 3D design I made in an app?
Yes. They use your design as the reference and rebuild it in professional CAD at exact dimensions. Ring Studio designs are built from real ring components, which makes them straightforward to interpret.
What details does a jeweller need for a custom ring?
The stone shape, size and type, the setting and prongs, halo and side stones, band style and width, metal and karat, finger size, budget and deadline. Top and side views of the design answer most remaining questions.
Who owns the design of a custom ring?
Practice varies. Some jewellers retain rights to their CAD files. If it matters to you, ask before commissioning and get it in writing.