Get the app

Guides

How to Clean and Care for Your Engagement Ring

To clean and care for your engagement ring, soak it in warm water with a drop of mild washing-up liquid, brush gently with a soft toothbrush, rinse and pat dry, about once a week. Take it off for the gym, gardening, cleaning and swimming, and have a jeweller check the prongs every six to twelve months.

On this page
  1. How to clean an engagement ring at home
  2. Cleaning halos, pavé and detailed galleries
  3. What not to use on your ring
  4. Caring for different stones
  5. Caring for different metals
  6. When to take your ring off
  7. Checking prongs and settings
  8. Storing your ring safely
  9. Professional cleaning and maintenance
  10. Designing a ring that's easier to care for
  11. Signs your ring needs attention now
Weekly clean
Warm water, mild washing-up liquid, soft brush
Professional check
Every 6-12 months: prongs, pavé, wear
Take it off for
Gym, gardening, cleaning, swimming, cooking with dough
Never use
Bleach, chlorine, abrasive powders, toothpaste

How to clean an engagement ring at home

This routine is safe for diamonds, sapphires and rubies in gold or platinum:

  1. Fill a small bowl with warm (not hot) water and add a few drops of mild washing-up liquid.
  2. Soak the ring for 15-20 minutes to loosen oils and lotion.
  3. Brush gently with a soft, clean toothbrush, paying attention to the underside of the stone and the gallery, where grime collects.
  4. Rinse under warm running water with the plug in, or over a bowl.
  5. Pat dry with a lint-free cloth. Don't use tissue; fibres catch on prongs.

For emeralds and morganite, skip the long soak: wipe with a damp soft cloth and a drop of mild soap, rinse quickly and dry. See the stone-specific section below.

A diamond attracts grease. A ring that looks lifeless after a week of hand cream usually just needs the underside cleaned, because a film there blocks the light entering the stone.

Cleaning halos, pavé and detailed galleries

Rings with many small stones or decorative galleries trap more dirt. Brush in two directions, along the band and across it, and pay attention to the underside of the halo where lotion collects. Don't use a pin or anything sharp to dig out grime; it can scratch metal or lever a small stone. If dirt is baked in, a professional clean with steam is safer than scrubbing harder at home.

What not to use on your ring

Caring for different stones

StoneMohs hardnessHome careWatch out for
Diamond (natural or lab-grown)10Soak and brushChips from sharp knocks on points and edges
Moissanite9.25Soak and brushSame as diamond
Sapphire, ruby9Soak and brushSome are heat- or fracture-treated; ask
Emerald7.5-8Quick wipe, no soak, no ultrasonicUsually oil-treated; brittle with inclusions
Morganite7.5-8Gentle washScratches and dulls; avoid knocks

Hardness only measures scratch resistance. Toughness (resistance to chipping) is a separate property, and even a diamond can chip if a point or thin girdle takes a knock. Read more on emerald engagement rings and morganite if you have a softer stone.

Caring for different metals

When to take your ring off

If you're often in situations like these, our guide to engagement rings for an active lifestyle suggests designs that cope better.

Checking prongs and settings

Once a month, hold the ring near your ear and tap it gently; a rattle can mean a loose stone. Look at the prongs under good light, or a loupe, for thinning tips, and run a soft cloth over them: if it snags, a prong may be lifting. On pavé bands, look for any empty seats. Any of these is a reason to see a jeweller promptly rather than at your next routine check. Prongs can be re-tipped or rebuilt long before the stone is lost.

Storing your ring safely

Professional cleaning and maintenance

Every six to twelve months, ask a jeweller to clean the ring professionally, check prongs and pavé, re-polish and, for white gold, re-plate if needed. Many jewellers do a basic clean and check free for rings they sold. Larger repairs such as re-tipping prongs or a resize are charged; see ring resizing cost.

Designing a ring that's easier to care for

Care starts at the design stage. A few choices make a ring much easier to live with: a lower setting, six prongs or a bezel instead of four fine claws, a band that isn't paper thin, and protected points on pears and marquises. Our bezel vs prong comparison covers the security trade-off.

In Ring Studio, a free 3D ring design app for iPhone, iPad and Android, you can see these choices before anything is made: switch between 4, 5, 6 and 8 prongs or a bezel, try round, claw, double or petite prong tips, adjust band width, and pick a plain band rather than pavé if you'd rather avoid tiny stones that need regular checks. Rotate the ring to see how high the stone sits from the side, then share the design with your jeweller.

Signs your ring needs attention now

Stop wearing the ring until it's checked if the stone is loose. It's a small repair now and a heartbreaking loss later.

Frequently asked questions

How often should I clean my engagement ring?

A quick soak and brush once a week keeps a diamond bright, because skin oils and lotion dull it fast. Have it professionally cleaned and checked every six to twelve months.

Can I use toothpaste to clean my engagement ring?

It's best not to. Toothpaste is mildly abrasive and can scratch gold and platinum and dull softer gemstones. Use mild washing-up liquid and a soft brush.

Is it safe to use an ultrasonic cleaner on my ring?

Usually fine for diamonds, sapphires and rubies in a secure setting, but avoid it for emeralds, morganite, treated stones, and rings with loose stones or fragile pavé, as vibration can loosen them.

Should I take my engagement ring off to sleep?

It's sensible. Prongs can catch on bedding and hair, and pressure can bend a thin band over time. Keep it in the same safe dish every night.

Can I wear my engagement ring in the shower?

Water won't harm a diamond or gold, but soap builds a dull film and the ring can slip off with soapy hands. Removing it before showering keeps it cleaner and safer.

Why has my white gold ring gone yellow?

White gold is usually rhodium plated, and the plating wears over time to reveal the warmer alloy underneath. A jeweller can re-plate it, typically every year or two.

Design your ring in 3DGet the free app