Rhodium Plating Explained
Rhodium plating is a thin layer of rhodium, a bright white platinum-group metal, electroplated over jewellery. It is what makes most white gold look brilliant white, and on a ring it wears away and needs renewing every so often.
On this page
- What rhodium is and why jewellers use it
- How rhodium plating works
- How long does rhodium plating last?
- How much does re-plating cost?
- Rhodium plating and nickel allergies
- Metals that do not need rhodium plating
- Making the plating last longer
- Planning a white metal ring in Ring Studio
- Is rhodium plating a reason to avoid white gold?
- What it is
- Electroplated layer of rhodium, roughly a micron or less thick
- Used on
- White gold, sometimes silver; occasionally platinum or yellow gold
- Lifespan on a ring
- Typically one to three years of daily wear
- Re-plating
- Clean, polish, dip; usually same day or a few days
- No plating needed
- Platinum, palladium, yellow and rose gold
What rhodium is and why jewellers use it
Rhodium belongs to the platinum group of metals alongside platinum and palladium. It is one of the whitest and most reflective metals, it does not tarnish and it is harder than gold. It is also scarce and expensive, and it is very difficult to work into a solid ring, so jewellers use it as a thin surface coat instead.
Most white gold is not perfectly white. Depending on the alloy it has a faint yellow, cream or grey tone. A rhodium coat gives it the bright, cool, mirror finish that shoppers expect in a shop window.
How rhodium plating works
Rhodium plating is an electroplating process. In a typical workshop it goes like this:
- Inspection. The jeweller checks the stones and claws, because plating time is a good moment to tighten anything loose.
- Polishing. Scratches are polished out. Plating copies the surface underneath, so a scratched ring plated without polishing still looks scratched.
- Cleaning. Ultrasonic and steam cleaning remove polish residue, and an electrocleaning step removes any remaining grease. Any trace of dirt stops the rhodium bonding.
- Plating. The ring is dipped in a rhodium solution with a small electric current, which deposits a very thin, even layer in a matter of seconds or minutes.
- Rinse and dry. The ring comes out bright white.
Most stones, including diamonds, sapphires and rubies, are fine in the plating bath. Porous, fracture-filled or otherwise treated stones, such as most emeralds and glass-filled rubies, may need protecting or removing, so tell the jeweller what is in your ring.
How long does rhodium plating last?
There is no fixed answer, because it depends on how the ring is worn and what is underneath. As a rough guide, an engagement ring worn every day often needs re-plating every one to three years. Things that shorten it:
- Wearing a wedding band next to it, which rubs the plating at the contact point.
- Manual work, gym equipment and frequent hand washing with abrasive soaps.
- Chlorine and harsh cleaning chemicals.
- A thin initial coat.
The underside of the band (the palm side) is usually where the warmer gold appears first. If the base alloy is quite white, the change can be subtle and you may choose to re-plate less often.
How much does re-plating cost?
Re-plating is one of the cheaper jewellery services. In the UK, many jewellers charge from tens of pounds for a simple ring up to around a hundred or more if it includes a full polish, claw check or a complicated design with lots of small stones. Some retailers include free re-plating for a period after purchase. Prices vary by jeweller, region and the price of rhodium, which can swing sharply; treat any figure as a guide.
Over the life of a white gold ring, re-plating costs add up. When comparing platinum vs white gold, include a few re-plates in the white gold column to see the true difference.
Rhodium plating and nickel allergies
Some white gold alloys contain nickel. While the rhodium layer is intact it keeps nickel away from your skin, which is why a new nickel white gold ring may feel fine and only cause irritation a year or two later. If you know you react to nickel, the long-term fix is a nickel-free alloy (palladium white gold), platinum, or a yellow or rose gold ring rather than relying on plating.
Metals that do not need rhodium plating
| Metal | Needs plating? | Notes |
|---|---|---|
| White gold | Usually | For the bright white finish |
| Platinum | No | Naturally white; develops a patina |
| Palladium | No | Naturally white-grey |
| Yellow gold | No | Only if you want it to look white |
| Rose gold | No | Colour is in the metal |
| Sterling silver | Optional | Plating slows tarnish |
Making the plating last longer
- Take the ring off for the gym, gardening, swimming and cleaning.
- Put hand cream and sanitiser on before the ring, and let it dry.
- Clean gently with warm water, mild washing-up liquid and a soft brush. Our ring care guide has the full routine.
- Store it alone in a soft pouch so it does not rub other jewellery.
- Consider a contoured wedding band that sits flush rather than grinding against the engagement ring; see curved wedding bands.
Planning a white metal ring in Ring Studio
If you are deciding between white gold and platinum, Ring Studio lets you design the ring once and switch metal to compare the look and the live price estimate. The app shows white gold in its plated, bright white state, which is how it will look on day one.
- Design the ring in white gold, including setting, halo and band.
- Switch to platinum and note the change in the price estimate (an estimate for comparison, not a quote).
- If you plan a wedding band, stack it with the engagement ring (Pro) and pick a straight, curved or chevron contour so the two rings sit flush and rub less.
- Share the ring code with your jeweller and ask what alloy they use and whether re-plating is included.
Is rhodium plating a reason to avoid white gold?
Not necessarily. Re-plating is quick and affordable, and many people combine it with an annual claw check they would want anyway. If the idea of maintenance puts you off, or you have a nickel allergy, consider platinum or palladium, or go warm with yellow gold or a two-tone design that uses platinum only for the claws.
Frequently asked questions
How long does rhodium plating last on a ring?
On an engagement ring worn every day, plating often lasts somewhere around one to three years before the underside starts to look warmer. Rings worn less often, or with whiter base alloys, can go longer.
How much does rhodium plating cost?
In the UK, re-plating a ring commonly costs from tens of pounds up to around a hundred, often more if it includes polishing, stone tightening or a complex design. Prices vary by jeweller and location.
Is rhodium plating bad for you?
No. Rhodium is inert and is widely regarded as hypoallergenic. It can even act as a barrier between skin and nickel in some white gold alloys, though that protection ends as the plating wears.
Does platinum need rhodium plating?
No. Platinum is naturally white. Some jewellers rhodium plate new platinum for an extra bright first finish, but it does not need it and is not normally re-plated.
Can yellow gold be rhodium plated?
Yes. Yellow gold can be plated to look white, which is sometimes used for two-tone effects, but the yellow shows through as it wears, so it is usually better to make white parts in white metal.