Trellis Engagement Rings
A trellis engagement ring holds the centre stone with prongs that cross and interweave below it, forming an X or lattice pattern in profile, like a garden trellis. From above it looks like a standard four prong solitaire; from the side it shows a woven, architectural head.
On this page
- What it is
- Prongs that cross under the stone in an X or lattice
- Top view
- Like a standard four prong solitaire
- Side view
- Woven, criss-cross pattern
- Security
- Good: crossed wires brace each other
- Best shapes
- Round, oval, cushion, radiant
- In Ring Studio
- No dedicated trellis option yet; nearest is a prong head with an open or rail gallery
What is a trellis engagement ring?
In a standard four prong head, each prong rises straight from the base to the stone. In a trellis head, the prongs lean and curve so that they pass over or around each other below the girdle. Seen from the side, two prongs form an X under each flank of the stone, which gives the setting its garden-trellis name. Some designs interweave the wires so they look braided; others simply cross.
The detail only shows in profile. Face-up, a trellis ring looks like a clean solitaire with four tips, which is exactly why people choose it: it is a classic ring with a private, structural twist.
Trellis compared with other heads
| Head style | Profile | Rigidity | Light into stone |
|---|---|---|---|
| Open prong | Straight, separate prongs | Relies on prong gauge | Most |
| Basket (rail) | Straight prongs joined by rails | High | High |
| Trellis | Prongs crossing in an X | High, wires brace each other | High |
| Cathedral | Metal arches rising from the shoulders | High | Moderate |
| Bezel | Solid metal collar | Highest | Least from the sides |
The gallery is the zone below the stone where these differences show. Our gallery styles guide covers open, rail, tulip and flame galleries, and the ring anatomy guide labels each part of the head.
Is a trellis setting secure?
A trellis head is a sound piece of engineering. Where straight prongs can be pushed outwards individually by a knock, crossed prongs support one another at the crossing point, so the head resists bending. The stone is still held at four tips, though, so the usual prong rules apply: no spare tip if one fails, and regular checks every six to twelve months. When tips wear, a jeweller can re-tip them without remaking the head.
Because the crossing needs little height, many trellis heads sit medium to low. That reduces knocks and snagging and makes it easier to wear a wedding band alongside.
Which stones suit a trellis setting?
- Round: the most common. Curved prongs cross symmetrically on all four sides.
- Oval: the X pattern stretches gracefully along the length. See oval engagement rings.
- Cushion and radiant: work well with prongs crossing beneath each corner.
- Pear, marquise: possible, with a V-prong at each point and the trellis on the rounded body.
- Emerald and asscher: less usual, as their step-cut pavilions show the metal beneath clearly, but some jewellers make striking versions.
Cleaning and care for a trellis head
Every point where the prongs cross is a small pocket for soap, hand cream and dust, and that build-up both dulls the stone and hides tip wear. Soak the ring in warm water with a drop of washing-up liquid, then brush under the stone and around each crossing with a soft toothbrush. A professional clean and check every six to twelve months lets the jeweller look at the tips with a loupe. More in our engagement ring care guide.
Pros and cons
| Pros | Cons |
|---|---|
| Classic top view with a distinctive profile | Less common, so often custom-made |
| Rigid, braced head | Crossing points collect grime |
| Usually low to medium height | Only four tips hold the stone |
| Lets plenty of light into the stone | Detail is subtle; it will not read from across a room |
Designing a trellis-style ring in Ring Studio
To be clear up front: Ring Studio does not have a dedicated trellis setting yet. Its heads are 4, 5, 6 and 8 prong, bezel, lotus and compass, with open, rail, tulip and flame galleries. You can still use it to get very close to the ring you want and hand the trellis detail to a jeweller.
- Choose your stone and carat, then select 4 prong, which matches the top view of most trellis heads.
- Try an open gallery for the airy look and a rail gallery for a more structured profile; whichever you prefer, note that you want the prongs crossed in an X.
- Choose prong tips, band style, width and metal. These are the decisions that most affect how the ring looks on the hand.
- Use the live price estimate to sense-check the stone and metal budget.
- Share the ring code or screenshots with your jeweller along with a note such as "trellis head, prongs crossing beneath the stone".
A jeweller recreates the design in their own CAD before making it, so adding a trellis gallery to an otherwise finished design is a normal request. Our guide to working with a jeweller explains how to brief them, and how custom rings are made walks through CAD, wax and casting.
Trellis or something else?
If you want a profile detail but would prefer to see it modelled exactly in 3D first, a lotus setting or a tulip gallery are close in spirit and available in Ring Studio. If you want structure that shows from the front too, look at cathedral rings. And if you like the trellis but want the cleanest band pairing, keep the head low and choose a straight band.
Frequently asked questions
What is a trellis setting?
A trellis setting is a prong head in which the prongs curve and cross over one another beneath the stone, so the side view shows an X or woven pattern. It typically has four prongs, each pair forming a cross under the girdle.
Is a trellis setting secure?
Yes. The crossed prongs brace one another, which makes the head stiffer than four separate straight prongs. The tips still need the same checks and occasional re-tipping as any prong setting.
Does a trellis setting sit low?
Trellis heads are often medium to low because the crossing wires need little height. That makes them practical for everyday wear and easier to pair with a wedding band than a tall cathedral head.
Which diamond shapes suit a trellis setting?
Round and oval stones are the most common, because the curved prongs follow a smooth outline. Cushion and radiant also work. Pointed shapes need a V-prong added at the point.
What is the difference between a trellis and a basket setting?
A basket setting joins straight prongs with horizontal rails, forming a cup. A trellis has no horizontal rails; the prongs themselves cross diagonally, creating an X pattern.